KitchenAid Pro Line KHWV01RSS, Technical Education

Page: 53 / 104

4-5
REMOVING THE FRONT PANEL AND BELLOWS
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the top cover and the control assem-
bly (see page 4-2 for the procedures).
4. To remove the front panel:
a) Open the washer door.
b) Remove the four screws from the top
of the toe panel.
c) Pull the top of the toe panel away from
the washer, lift the panel and unhook it
at the bottom, and remove the panel.
Toe Panel
Screws
d) Using a small screwdriver, pry the re-
taining wire spring out, and then pull the
retaining wire from around the bellows.
e) Unhook the bellows from the lip of
the door panel and push it behind the
panel.
f) Remove the three screws from the door
lock and door switch assembly (see step
5 on page 4-4).
g) Close the washer door.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
Remove Bellows
From Panel Lip
Retaining Wire Spring
Unhook Clips
Toe Panel
Continued on the next page.