KitchenAid Pro Line KHWV01RSS, Technical Education

Page: 35 / 104

3-17
Prewash
Use this option for loads of heavily soiled items
that need pretreatment. This option adds a 15
minute prewash and drain to the main wash
cycle.
Add detergent to the Prewash and Main Wash
compartments of the Dispenser Drawer.
When using Prewash, do not use liquid de-
tergent in the Main Wash compartment. Use
powdered detergent for the main wash cycle.
See “Using the Dispenser,” page 3-11.
Soil Treat
Use this option for heavily soiled loads that need
improved soil treatment. When Soil Treat is
selected, the water temperature of the selected
wash cycle is automatically set to Hot/Cold.
The water will then be heated to a hot water
temperature to aid in stain removal. This option
will provide optimal removal of organic stains
such as blood.
NOTE: If Soil Treat is selected with the Sanitary
cycle, the water will be heated to an extra hot
temperature.
Energy Saver
™
Option
The Energy Saver
™
Option allows you to increase
your energy savings on the higher temperature
cycles (White/Cotton and Heavy Duty) while
maintaining cleaning performance by lengthen-
ing the wash time by only 10 minutes.
NOTE: For the best energy performance, use
the Normal/Casual Cycle.
Hours Delay
To begin the wash cycle later select Hours Delay
until the desired delay time (in hours) shows in
the Estimated Time Remaining display. Select
START. The countdown to the wash cycle will
show in the display window.
When delaying a cycle, use only powdered
detergents in the main wash compartment
since liquid detergents may seep out of the
compartment during Delay, before the wash
cycle begins.
•
•
•
Extra Spin
Use this option to add an additional spin to any
cycle.
Cycle End Tone
This signal is helpful when you are removing
items from the washer as soon as it stops.
Normal Rinse
Consists of a two phase rinsing process that is
effective for everyday laundry.
Extra Rinse
A second rinse can be used to ensure the
removal of detergent or bleach residue from
garments. This option provides an additional
rinse with the same water temperature as the
first rinse.
Extended Rinse
This option provides the best rinse level, to allow
for even better detergent removal.
MODIFIERS
Preset cycle settings of water Temperature,
Wash/Rinse, and Spin Speed can be changed.
You can change a modifier after starting a cycle
anytime before the selected Modifier begins.
Not all Modifiers are available with all options
and cycles.
Modifiers
To change cycle time, select the SOIL LEVEL
button until the desired setting illuminates.
To change the water temperature, select
the TEMP button until the desired setting
illuminates.
To change the spin speed, select the SPIN
SPEED button until the desired setting il-
luminates.
•
•
•