KitchenAid Pro Line KHWV01RSS, Technical Education

Page: 32 / 104

3-14
To lock the controls
Select and hold DRAIN/SPIN for 3 seconds.
The CONTROL LOCK icon illuminates.
To unlock the controls
Select and hold DRAIN/SPIN for 3 seconds until
the CONTROL LOCKED icon disappears.
Estimated Time Remaining
The cycle times vary automatically based on
your water pressure, water temperature, de-
tergent, and clothes load. The cycle time will
be extended if oversudsing occurs or the load
is unbalanced.
CYCLES
Wash Cycles
Wash Cycles can be selected by pressing the
button next to the desired wash cycle. Each
cycle is designed for different types of fabric
and soil levels.
Each cycle has a preset Soil Level (cycle
time), Water Temperature, Spin Speed and
may have preset Options. The preset settings
provide the recommended fabric care for the
selected cycle.
The preset settings can be changed anytime
before START is selected. Not all Options and
Modifiers are available with all Cycles. (To
change settings after the cycle has started,
select PAUSE/CANCEL, then select the
desired settings. Select START [for approxi-
mately 1 second] to continue the cycle.)
Preset cycle settings
Each cycle has a preset Soil Level (cycle time),
Water Temperature, and Spin Speed. The preset
settings provide the recommended fabric care
for the selected cycle. See chart.
•
•
Cycle
Estimated
Time*
(hr:min)
Soil
Level
Wash/
Rinse
Temp
Spin
Speed
Sanitary (2:00) Normal Extra
Hot/Cold
Extra
High
White/
Cotton
(1:10) Heavy Hot/
Cold
Extra
High
Heavy Duty (1:30) Heavy Hot/
Cold
Extra
High
Oversized
Items
(0:55) Normal Warm/
Cold
Extra
Low
Normal/
Casual
(0:45) Medium Warm/
Cold
High
Rapid
Wash
(0:35) Light Warm/
Cold
Extra
High
Delicate/Silk (0:35) Normal Cold/
Cold
No
Spin
Wool/Hand
Wash
(0:35) Normal Cold/
Cold
Extra
Low
Rinse/Spin (0:25) N/A Cold/
Cold
Extra
High
Extra
High
Drain/Spin (0:15) N/A N/A
* The cycle times vary automatically based
on your water pressure, water temperature,
detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the
load is unbalanced.