Kikusui PAN 110-1.5A, Operation Manual

Page: 76 / 160

4-16 PAN-A
Fig.4-11 Connection and setup for output voltage con-
trol using external voltage
6. Re-check that the connections on the terminal board and
the switch settings are correct.
Be fore controlling output voltage using the external voltage, re-
adjust the voltage system of the unit. For the adjustment procedure,
see "6.3 Adjustment".
2
7
8
13
14
19
1 2 3 4 5 6 7 8
9 10
S1 S2 S3 S4 S5
OVP
11
Rear OUTPUT terminal
board (PAN16-50A)
Rear CONTROL
terminal board
Rear OUTPUT
terminal board
Front control panel
[2]
[3]
Vext
Vext:external voltage source
0 ≤ Vext ≤ 10.5[V]
Ertg: rated output voltage [V]
2-core shielded wire or
twisted-pair wire
Set S1 to the upper position
and S2 to the lower position.
α
: Coefficient 0 to 1 determined by the
position of the VOLTAGE control
knob:
Fully counterclockwise:
α
= 0
Fully clockwise:
α
= 1
Output voltage Eo ≈
Ertg • Vext •
α
10
[V]