Kikusui PAN 110-1.5A, Operation Manual

Page: 110 / 160

5-4 PAN-A
Control Panel
Fig.5-5 PAN-A series control panel
[5] OUTPUT
Turns the output on and off. It is turned on at pushed.
When the output is turned off, the output circuit is set into a state of
high impedance (several k
Ω
).
[6] OUTPUT ON indication
This LED lights up when the output is turned on.
[7] LIMIT
This is used to preset or check the output voltage and the output cur-
rent. While pressing this switch, the currently preset voltage and cur-
rent are displayed.
[8] PRESET OVP
This is used to preset or check the OVP (overvoltage protection) volt-
age. While this switch is held down, the currently preset OVP voltage
is displayed.
[9] CURRENT
This is used to set output current for constant current operation mode.
(10 turns)
CURRENT VOLTAGE
OUTPUT UTPUT LIMI MIT
OVP
A
V
PRE PRESE SET OV T OVP
CC CV
ALM
[11]
[7]
[10]
[8]
[17]
[15]
[16] [14] [13] [12]
[6]
[5]
[9]