Kikusui PAN 110-1.5A, Operation Manual

Page: 8 / 160

VI PAN-A
Operation
• Check that the AC input voltage setting and the
fuse rating are satisfied and that there is no
abnormality on the surface of the power cord. Be
sure to unplug the power cord or stop applying
power before checking.
• If any abnormality or failure is detected in the
products, stop using it immediately. Unplug the
power cord or disconnect the power cord from the
switchboard. Be careful not to allow the product to
be used before it is completely repaired.
• For output wiring or load cables, use connection
cables with larger current capacity.
• Do not disassemble or modify the product. If it
must be modified, contact Kikusui distributor/
agent.
Maintenance and checking
• To avoid electrical shock, be absolutely sure to
unplug the power cord or stop applying power
before performing maintenance or checking.
• Do not remove the cover when performing
maintenance or checking.
• To maintain performance and safe operation of
the product, it is recommended that periodic
maintenance, checking, cleaning, and calibration
be performed.
Service
• Internal service is to be done by Kikusui service
engineers. If the product must be adjusted or
repaired, contact Kikusui distributor/agent.
Check?