Kikusui PAN 110-1.5A, Operation Manual

Page: 46 / 160

3-2 PAN-A
Turning on the power procedure
1. Check that the POWER switch is turned off.
2. Check that the OUTPUT switch is turned off.
3. Open the front sub-panel cover of the control panel to con-
fi rm that all control switches (S1 to S5) are off.
4. Check that the SENS switch on the rear panel is off.
5. Check that the AC power code is correctly connected.
6. Turn on the switch on the switchboard which supplies
power to the unit, or connect the AC power code plug to a
outlet.
7. Turn on the POWER switch.
The LED on the control panel lights up.
8. While pressing the LIMIT switch, and turn the VOLTAGE
control knob; check that the output voltage can be preset in
a range from zero to the rated output voltage value.
9. While pressing the LIMIT switch, and turn the CURRENT
control knob; check that the output current can be preset in
a range from zero to the rated output current value.
Now, the unit is ready for use.