Kikusui PAN 110-1.5A, Operation Manual

Page: 54 / 160

3-10 PAN-A
Using the auxiliary output terminals on the front panel
• For safety, turn off the POWER switch when connect-
ing the load.
• After connecting the load cable, mount the auxiliary
output terminal cover. To mount the auxiliary output
terminal cover, see "3.4 Mounting the auxiliary output
terminal cover".
• To assure a good connection of the load cable to the
output terminals, use crimped terminals.
The PAN16-50A has no auxiliary output terminals on the front panel.
Fig.3-2 Connection to the auxiliary output terminals
on the front panel
WARNING
CAUTION
+
-
0 - 5V 10A
Auxiliary output terminal
Crimped terminal
on the load cable
Connect the chassis ground terminal (
⊥
)
to either the - (neg.) terminal or + (pos.)
terminal.