Kia Soul 2018 Owner'S Manual Download

Page: 371 / 673

Audio system

5 100

Setup

Access Display, Sound, Date/Time,
Bluetooth*, System, Screensaver
and Display Off settings.
Select the

[SETUP]

button on the

audio system.
* if equipped

Display

Select the

[SETUP]

button on the

audio system

➟

Select [Display].

• Dimming mode(Mode):

Audio

screen brightness can be adjusted
to the time of day.

• Brightness(Illumination): The bright-

ness of the audio screen can be
changed.

• Text scroll*: If text is too long to be

displayed on the screen, enable
the text scroll function.

* if equipped

Sound

Select the

[SETUP]

button on the

audio system

➟

Select [Sound].

• Position: Sound balance and pan-

ning can be adjusted.

• Equaliser(Tone):

Sound tone

colour can be adjusted.

• Speed dependent volume con-

trol(Speed Dependent Volume):
Automatically adjust volume based
on vehicle speed.

• Beep: Select whether to play a

beep sound when the screen is
touched.

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Soul 2018

Reviews:

Related manuals for Soul 2018

Brands by name

Popular brands

Kia Soul 2018, Owner'S Manual

Search results

Summary of Contents for Soul 2018

Reviews:

Related manuals for Soul 2018

Brands by name

Popular brands