manualshive.com logo in svg

Kia Soul 2018, Owner'S Manual, Page: 600 / 673

Share
Download
Kia Soul 2018 Owner'S Manual Download Page 600

8 81

Maintenance

2. Remove the fuse box cover by

pressing the tap and pulling up.

When the blade type fuse is dis-

connected, remove it by using the
clip designed for changing fuses
located in the engine room fuse
box. Upon removal, securely insert
reserve fuse of equal quantity.

3. Check the removed fuse; replace it

if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.

4. Push in a new fuse of the same rat-

ing, and make sure it fits tightly in
the clips. If it fits loosely, consult a
professional workshop. Kia recom-
mends to consult an authorised Kia
dealer/service partner.

Multi fuse

OPS073039

CAUTION

After checking the fuse panel in
the engine compartment, secure-
ly install the fuse panel. If not,
cover through the audible click-
ing sound. Electrical failures may
occur from water contact.

CAUTION

Do not remove fuses, relays and
terminals fastened with bolts or
nuts. The fuses, relays and ter-
minals may be fastened incom-
pletely, and it may cause a pos-
sible fire. If fuses, relays and ter-
minals fastened with bolts or
nuts are blown, consult a pro-
fessional workshop. Kia recom-
mends to consult an authorised
Kia dealer/service partner.

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments