manualshive.com logo in svg

Kia Soul 2018, Owner'S Manual, Page: 391 / 673

Share
Download
Kia Soul 2018 Owner'S Manual Download Page 391

Driving your vehicle

14

6

Starting the engine

✽

✽

NOTICE 

- 

Kick down 
mechanism 
(if equipped)

If your vehicle is equipped with a
kick down mechanism in the accel-
erator pedal, it prevents you from
driving at full throttle unintention-
ally by making the driver require
increased effort to depress the accel-
erator

pedal. However, if you

depress the pedal more than approx-
imately 82%, the vehicle can be at
full throttle and the accelerator
pedal will be easier to depress. This
is not a malfunction but a normal
condition.

WARNING

• Always wear appropriate

shoes when operating your
vehicle.

Unsuitable shoes

(high heels, ski boots,etc.)
may interfere with your ability
to use the brake, accelerator
and clutch pedal.

• Do not start the vehicle with

the accelerator pedal
depressed. The vehicle can
move and lead to an accident.

• Wait until the engine rpm is

normal. The vehicle may sud-
denly move if the brake padel
is released when the rpm is
high.

(Continued)
• Never reach for the engine

start/ stop button or any other
controls through the steering
wheel whilst the vehicle is in
motion. The presence of your
hand or arm in the area could
cause loss of vehicle control,
an accident and serious bodi-
ly injury or death.

• Do not place any movable

objects around the driver's
seat as they may move whilst
driving, interfere with the driv-
er and lead to an accident.

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments