Features of your vehicle
28
4
Opening the bonnet
1. Pull the release lever to unlatch
the bonnet. The bonnet should
pop open slightly.
2. Go to the front of the vehicle, raise
the bonnet slightly, push the sec-
ondary latch (1) upside and lift the
bonnet (2).
3. Raise the bonnet. It will complete-
ly rise by itself after it has been
raised about halfway.
Closing the bonnet
1. Before closing the hood, check the
following:
• All filler caps in engine compart-
ment must be correctly installed.
• Gloves, rags or any other com-
bustible material must be
removed from the engine com-
partment.
2. Return the support rod to its clip to
prevent it from rattling.
3. Lower the hood until it is about 30
cm above the closed position and
let it drop. Make sure that it locks
into place.
4. Check that the hood has engaged
properly. If the hood can be raised
slightly, it is not properly engaged.
Open it again and close it with a
little more force.
BONNET
OPS043024R
WARNING
Open the bonnet after turning off
the engine on a flat surface,
shifting the shift lever to the
P(Park) position for automatic
transaxle / dual clutch transmis-
sion and to the 1(First) gear or
R(Reverse) for manual transaxle,
and setting the parking brake.
OPS046025L
Summary of Contents for Soul 2018
