Kia Soul 2018 Owner'S Manual Download Page 341

Page: 341 / 673

Audio system

5 70

Media

MP3

Supported audio formats

✽

NOTICE

File formats other than the formats
above may not be recognized or
playable. Information such as file-
name may not be displayed.

Range of supported compressed file
types

1. Bitrate range (Kbps)

2. Sampling frequency (Hz)

• The sound quality of MP3/WMA

compressed files may vary
depending on the bitrate. (A higher
bitrate can have better sound qual-
ity.)

• The product only recognizes files

with the MP3 or WMA extension.
Files without one of these exten-
sions are not recognized.

3. Number of recognizable folders

and files

• Folders: 2,000 for USB
• Files: 6,000 for USB
• No recognition limit for folder hier-

archies

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Soul 2018

Reviews:

Kia Soul 2018, Owner'S Manual, Page: 341 / 673

Search results

Summary of Contents for Soul 2018

Reviews: