manualshive.com logo in svg

Kia Soul 2018, Owner'S Manual, Page: 80 / 673

Share
Download
Kia Soul 2018 Owner'S Manual Download Page 80

Safety features of your vehicle

62

3

Why didn’t my air bag go off in
a collision? (Inflation and non-
inflation conditions of the air
bag)

There are many types of accidents
in which the air bag would not be
expected to provide additional
protection.
These include rear impacts, sec-
ond or third collisions in multiple
impact accidents, as well as low
speed impacts.

(1) SRS control module / 

Rollover sensor (if equipped)

(2) Front impact sensor

(3) Side impact sensor (if equipped)
(4) Side pressure sensor (if equipped)

OPS036025R/OPS036026R/OPS036027R/OPS033028/OPS033029

Air bag collision sensors

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments