Kia Soul 2018 Owner'S Manual Download Page 307

Page: 307 / 673

Audio system

5 36

Precautions when connecting Bluetooth

devices

• The vehicle supports the following

Bluetooth

functions.

Some

Bluetooth

devices may not sup-

port some functions.
1) Bluetooth

Handsfree phone

calls

2) Operations during a call

(Private, Switch, Mic Vol.(Out
Vol.) controls)

3) Download call history saved to

the Bluetooth

device

4) Download contacts saved to the

Bluetooth

device

5) Automatic contacts/call history

download when Bluetooth

connected

6) Automatic Bluetooth

device

connection when the vehicle is
started

7) Bluetooth

audio streaming

playback

• Before connecting the audio sys-

tem to your device, make sure your
device supports Bluetooth

• Even if your device supports

Bluetooth

, a Bluetooth

connec-

tion cannot be established if the
device’s Bluetooth

function is

switched off. Search and connect
with the Bluetooth

function

enabled.

• Pair or connect Bluetooth

devices

to the audio system with the vehi-
cle at a standstill.

• If a Bluetooth

connection is lost

due to abnormal conditions whilst
a Bluetooth

device is connected

(communication range exceeded,
device power OFF, communication
errors, etc.), the disconnected
Bluetooth

device is searched for

and automatically reconnected.

• If you want to disable the

Bluetooth

device auto-connect

function, turn the Bluetooth

func-

tion OFF on your device. Consult
the user manuals for individual
devices to see whether Bluetooth

is supported.

• Handsfree call quality and volume

may vary depending on the type of
Bluetooth

device.

• Some Bluetooth

devices are sub-

ject to intermittent Bluetooth

con-

nection failures. In this case, use
the following method.
1) Turn the Bluetooth

function off

on your Bluetooth

device

➟

Turn it on and try again.

2) Delete the paired device from

both the audio system and
Bluetooth

device, then pair

again.

3) Power down your Bluetooth

device

➟

Turn it on and try

again.

4) Completely remove the battery

from your Bluetooth

device;

reinsert it, reboot, and attempt
connection.

5) Restart the vehicle and reat-

tempt connection.

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Soul 2018

Reviews:

Related manuals for Soul 2018

Brands by name

Popular brands

Kia Soul 2018, Owner'S Manual

Search results

Summary of Contents for Soul 2018

Reviews:

Related manuals for Soul 2018

Brands by name

Popular brands