manualshive.com logo in svg

Kia Soul 2018, Owner'S Manual, Page: 578 / 673

Share
Download
Kia Soul 2018 Owner'S Manual Download Page 578

8 59

Maintenance

Front windscreen wiper blade

Type A

1. Raise the wiper arm and turn the

wiper blade assembly to expose
the plastic locking clip.

2. Compress the clip and slide the

blade assembly downward.

3. Lift it off the arm.
4. Install the blade assembly in the

reverse order of removal.

Type B

1. Raise the wiper arm.

OQL076115R

CAUTION

Do not allow the wiper arm to
fall against the windscreen,
since it may chip or crack the
windscreen.

OQL076116R

OQL076117R

OQL076118R

CAUTION

Do not allow the wiper arm to
fall against the windscreen,
since it may chip or crack the
windscreen.

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments