manualshive.com logo in svg

Kia Soul 2018, Owner'S Manual, Page: 369 / 673

Share
Download
Kia Soul 2018 Owner'S Manual Download Page 369

Audio system

5 98

Radio voice commands

(* if equipped)

Media commands

If no media type is connected or there are no files avail-
able for playback, a voice prompt to that effect is played.
• If the name of the media currently playing is stated, the

current status of operation is maintained.
E.g. Say ‘USB’ during USB playback.

• External (AUX) devices do not support play, pause,

shuffle and repeat voice commands.

(* if equipped)

Command

Features

●

FM

Start FM radio.

●

AM

Start AM radio.

●

DAB

Start DAB* radio.

●

Radio

Start the radio in FM, AM or DAB* mode,
depending on what mode was used last.

●

Traffic
Announcement On

Turn traffic announcement on.

●

Traffic
Announcement Off

Turn traffic announcement off.

O Station List

Show a radio station list.

O Preset <1–40>

Run the saved preset 1–40.

Command

Features

●

USB

• Play music files on the currently connected

USB drive.

• Play iPod

®

music instead of USB if an iPod

®

is

connected.

●

My Music

Play My Music files saved internally on the sys-
tem.

●

iPod

®

• Play music files on the currently connected

iPod

®

.

• Play USB drive music instead of iPod

®

if a

USB drive is connected.

• Operate in the same manner when an iPhone

is connected.

●

Bluetooth

®

Audio

Play music files on the currently connected
Bluetooth

®

device.

●

AUX

Play music on the currently connected external
device.

●

Media

Play the last played music media.

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments