manualshive.com logo in svg

Kia Soul 2018, Owner'S Manual, Page: 615 / 673

Share
Download
Kia Soul 2018 Owner'S Manual Download Page 615

Maintenance

96

8

Headlamp (Low/High beam)
bulb replacement

1. Turn off the engine and open the

bonnet. Disconnect the negative
battery cable.

2. Disconnect the power connector

front the back of the headlamp
assembly.

3. Loosen the retaining bolts.

4. Pull out the end of the front

bumper.

5. Remove the headlamp assembly

from the body of the vehicle.

❈ 

If you can reach the bulb without
removing the headlamp assembly,
you do not need to do step 3,4 and
5.

OPS076046L

OPS073051

OPS076028L

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments