Kia Soul 2018 Owner'S Manual Download Page 149

Page: 149 / 673

4 61

Features of your vehicle

Press start button whilst turn
steering (for smart key system)

• This warning message illuminates

if the steering wheel does not
unlock normally when the Engine
Start/Stop Button is pressed.

• It means that you should press the

Engine Start/Stop Button whilst
turning the steering wheel right
and left.

Steering wheel unlocked
(for smart key system)

• This warning message illuminates

if the steering wheel does not lock
when the Engine Start/Stop Button
changes to the OFF position.

Check steering wheel lock
system (for smart key system)

• This warning message illuminates

if the steering wheel does not lock
normally when the Engine
Start/Stop Button changes to the
OFF position.

Press brake pedal to start engine
(for smart key system and auto-
matic transaxle / dual clutch
transmission)

• This warning message illuminates

if the Engine Start/Stop Button
changes to the ACC position twice
by pressing the button repeatedly
without depressing the brake pedal.

• It means that you should depress

the brake pedal to start the engine.

Press clutch pedal to start engine
(for smart key system and manual
transaxle)

• This warning message illuminates if

the Engine Start/Stop Button
changes to the ACC position twice
by pressing the button repeatedly
without depressing the clutch pedal.

• It means that you should depress

the clutch pedal to start the engine.

Key not in vehicle
(for smart key system)

• This warning message illuminates

if the smart key is not in the vehicle
whilst the door is opened or closed
with the ignition switch in the ACC
position or engine is running.

• It means that you should always

have the smart key with you.

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Soul 2018

Reviews:

Related manuals for Soul 2018

Brands by name

Popular brands

Kia Soul 2018, Owner'S Manual

Search results

Summary of Contents for Soul 2018

Reviews:

Related manuals for Soul 2018

Brands by name

Popular brands