Kia Soul 2018 Owner'S Manual Download Page 352

Page: 352 / 673

Audio system

AUX

Running AUX

• Press the

[MEDIA]

button, and

select [AUX].

• Connect the external device con-

nection jack to the AUX terminal to
run AUX.

(1) Sound Settings: Audio sound set-

tings can be changed.

My Music

(1) Repeat

Enable/disable repeat.

(2) Shuffle

Enable/disable shuffle play.

(3) List

View a list of all songs.

(4) Menu

Navigate to the menu screen.

(5) Album Image

View song info.

(6) Pause

Pause or play music.

(7) Playback progress

Press to skip to the desired location.

Playback

Press the

[MEDIA]

button, and

select [My Music].
• My Music cannot be selected if it

does not contain music.

• Check the content of your USB

drive before saving music to My
Music.

Changing songs

Press the

[SEEK/TRACK]

button to

play the previous or next song.
• Press and hold the

[SEEK/TRACK]

button to rewind or fast forward the
currently playing song.

• Search songs by turning the

TUNE

knob and press the knob to play.

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Soul 2018

Reviews:

Kia Soul 2018, Owner'S Manual, Page: 352 / 673

Search results

Summary of Contents for Soul 2018

Reviews: