Kia Soul 2018 Owner'S Manual Download

Page: 334 / 673

Audio system

Steering wheel remote control

(Voice Recognition equipped model)

❈

The actual features in the vehicle
may differ from the illustration.

(1)

MODE

• Press the button to change the

mode in the following order: Radio

➟

Media.

• Press and hold the button to turn

off. (Type B-2)

(2)

VOLUME

• Press to adjust the volume.

(3)

UP/DOWN

• Press the button in radio mode to

search Presets.

• Press and hold the button in radio

mode to search frequencies.

• Press the button in media mode to

change the current song.

• Press and hold the button in media

mode to quick search through
songs.

(4)

VOICE

(if equipped)

• Pressing the button

- If voice recognition is not active:

Start voice recognition.

- During the notification message

after voice recognition is started:
The notification message is
skipped, and voice command
standby mode is activated.

- Whilst standing by for a voice

command: Extend voice com-
mand standby time.

• Pressing and holding the button:

End voice recognition.

Summary of Contents for Soul 2018


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Soul 2018

Reviews:

Related manuals for Soul 2018

Brands by name

Popular brands

Kia Soul 2018, Owner'S Manual

Search results

Summary of Contents for Soul 2018

Reviews:

Related manuals for Soul 2018

Brands by name

Popular brands