IMF63
2018+ Hyundai Kona Mud Flap Installation Instruction
1
Version 1.1 Release Date 2.12.2020
View instructions and photos online
7
IMPORTANT NOTES
INSTALLATION KIT CONTENTS
QUANTITY
PART
ITEM ID
2
LOCK NUT
SSLNUT
12
WASHER
SMWASH
4
INSERT
INS5
4
ROUND SPACER
.25SP
6
SCREW
1SS
4
LONG SCREW
1.5SS
4
POLYGON CLIP
POLCLP
1
1
BRACKET LEFT REAR
BRACKET RIGHT REAR
BMF57-LR
BMF57-RR
4
BRACKET
BMF63
Recommended Tools Low-profile offset or ratcheting screw driver, 7/16
th
” wrench, flathead screwdriver.
Important Tips Installation should be done on an even surface. Do not use power tools to tighten hardware. Hand tools only. Avoid overtightening.
RALLY ARMOR - A BIT ABOUT OUR STANDARD IN MUD FLAPS
Rally Armor mud flaps are fabricated from a high grade polyurethane plastic that is rigorously reviewed for quality and consistency. As with all
manufacturing processes, controlled conditions and multiple QC checkpoints minimize major irregularities, however certain very minor surface layer
marks appear periodically. These are visual variations that do not affect construction nor do they impede the performance of the flaps. Most matte
away as the material ages naturally with continued exposure to the outdoors. Each flap is unique in appearance yet all are equally structurally sound.
CARE AFTER INSTALLATION
Once installed, the vehicle owner is responsible for the condition of the mud flaps and all costs
associated with replacing damaged or lost parts. Warranty covers manufacturer defect on new, never installed parts.
Watch for blind spots when parking
Avoid contact with curbs, bumps and objects that can compress the flaps with
excessive force. Be sure to check wheel clearances, especially on vehicles equipped with aftermarket wheels and suspensions.
QUESTION ON INSTALLATION? CONTACT US ONLINE
NEED TO PURCHASE REPLACEMENT PARTS? SEND RECEIPT OR PHOTO OF RALLY ARMOR LOGO ON FLAPS TO US
