Keysight U3810 Series Getting Started Guide
70
Test the XBee module via BeagleBone Serial Port
1
Enter
minicom -D /dev/ttyS1 -b 9600
to open a minicom terminal to /dev/ttyS1.
2
To test the presence of the module, type +++ to get the module into command mode. This will
also print back “OK”
3
Press <
Ctrl-A
> and then x to exit the minicom.
debian@beaglebone:~$ minicom -D /dev/ttyS1 -b 9600
Welcome to minicom 2.7
OPTIONS: I18n
Compiled on Apr 22 2017, 09:14:19.
Port /dev/ttyS1, 20:30:08
Press CTRL-A Z for help on special keys
+++
OK
Test the LoRa module via BeagleBone Serial Port
1
Open a terminal to /dev/ttyS2 using 57600 baud by entering.
minicom -D /dev/ttyS2 -b
57600
2
With the terminal open, enter a Control-a and the then character e. This will turn on the echo.
3
The LoRa module requires both a Carriage Return and Line Feed at the end of any command. To
clear out the buffer, press
Enter
and then a Control-j. You may see “invalid_param”
4
To verify the radio version type
sys get ver <enter><CTRL-j>
debian@beaglebone:~$ minicom -D /dev/ttyS2 -b 57600
Welcome to minicom 2.7
OPTIONS: I18n
Compiled on Apr 22 2017, 09:14:19.
Port /dev/ttyS2, 19:59:29
Press CTRL-A Z for help on special keys
invalid_param
sys get ver
RN2903 1.0.3 Aug 8 2017 15:11:09
5
Press <CTRL-a> and then x to exit minicom.
Summary of Contents for U3810A
Page 1: ...Keysight U3810A Advanced IoT Teaching Solution Getting Started Guide ...
Page 78: ...Keysight U3810 Series Getting Started Guide 78 IMU Characteristics from the LSM9DS1 datasheet ...
Page 131: ...Keysight U3810 Series Getting Started Guide 131 ...
Page 132: ...Keysight U3810 Series Getting Started Guide 132 Disassembly ...
