Keysight Technologies U3810A, Getting Started Manual

Page: 15 / 134

Keysight U3810 Series Getting Started Guide 15
Overview
Keysight’s ready-to-teach Advanced IoT Teaching Lab Solution is designed to assist educators
in quickly setting up new engineering courses on the Internet of Things, with the intention of
producing students who will fully understand the challenges and requirements of the IoT
system design cycle, from design and validation to deployment in the market.
This courseware will also cover critical design considerations that have emerged with the
evolution of the Internet of Things, such as cybersecurity, coexistence, compliance and
continuity in the following modules:
U3813A/14A IoT System Design and Validation Fundamentals
The U3813A/14A IoT System Design and Validation Fundamentals lab setup is a ready-to-
teach package focused on the fundamentals of the Internet of Things and embedded system
design. It introduces students to IoT architecture, technologies, standards, wireless protocols,
applications, and ecosystems. It also covers IoT embedded system design that includes device
cybersecurity basics.
U3815A/16A IoT Wireless Communication and Compliance
The U3815A/16A Wireless Connectivity and Network Security for IoT Frameworks lab setup is
a ready-to-teach package started from portion of IoT System Design and Validation
Fundamentals. After that move into how to develop typical IoT applications with various types
of wireless connectivity and compliance study, it also covers IoT device and network security
learning.
U3817A/18A: IoT Precision Power Measurement and MEMS Sensors
The U3817A/18A Precision Power Measurement and MEMS sensors lab setup is a ready-to-
teach package started from portion of IoT System Design and Validation Fundamentals. Then
move into topic of how to characterize the power consumption of IoT devices onboard
controllers, sensors and wireless modules, eventually covers sophisticated battery optimization
learning involve RF event detector and analysis software.
The U3810A courseware series comes with teaching slides and training kit that works with
BeagleBone and includes lab sheets and problem-based assignments for hands-on learning.
It is designed to introduce students to Keysight hardware and software used in the industry to
form a complete teaching solution.
Intended Use of Getting Started Guide
The Getting Started Guide is intended for use by a University Teaching Lab Manager as a guide for unpacking,
set up, verification and maintenance of the Modular prototype kit.
The GSG should be consulted at the beginning of a new semester to assist in returning the Modular prototype
kit to its initial factory configuration and for verification before the student(s) receives the kit. In the first lab of
each semester the student will run a procedure.
Characteristics and Specifications
For the characteristics and specifications of the U3810A Advanced IoT Teaching Solution, refer to the Data
Sheet at
https://www.keysight.com/us/en/assets/3120-1243/data-sheets/Advanced-IoT-Teaching-Lab-
Solution.pdf .