Keysight U3810 Series Getting Started Guide
128
19
If the devices all show up it is time to install the U3810A code. Acquire the latest LabCode.tar.gz
from Keysight. Download this as well as the LabCodeReset.gz file to the Debian home directory.
LabCodeReset.gz
20
Extract the LabCodeReset.sh file by using the
tar -xzf LabCodeReset
.gz command.
21
Execute the file by entering
./LabCodeReset -u
This will ask for the root password for it to
install the latest revision of the LabCode.
debian@beaglebone:~/Desktop$ ./LabCodeReset.sh -u
Do you want to erase before refreshing the code? (y/n) y
Erasing LabCode
Refreshing LabCode
LabCode/
…
.KS_Files/boot/uEnv.txt
Updating Keysight Revisions
[sudo] password for debian:
Reboot is suggested
22
Before rebooting, follow the directions in
Appendix D. Restoring U3810A startup files
for setting
up the startup scripts.
23
Reboot the system one more time. Once again If there is an older version of the operating
system, the USR button as describe in the
Uninitialized BeagleBone devices
24
On reboot test the LabCode and hardware interaction. Follow the
25
If everything is working, any entries into the connmanctl Wi-Fi Access Point table should be
deleted. Connmanctl stores this information in plain text and can be read by anyone receiving a
copy of the image. To delete the access point information sudo rm -Rf /var/lib/connman/wifi*
Summary of Contents for U3810A
Page 1: ...Keysight U3810A Advanced IoT Teaching Solution Getting Started Guide ...
Page 78: ...Keysight U3810 Series Getting Started Guide 78 IMU Characteristics from the LSM9DS1 datasheet ...
Page 131: ...Keysight U3810 Series Getting Started Guide 131 ...
Page 132: ...Keysight U3810 Series Getting Started Guide 132 Disassembly ...
