Keysight Technologies U3810A, Getting Started Manual

Page: 22 / 134

Keysight U3810 Series Getting Started Guide 22
DC-to-DC Converter and Charger Jumpers
Assure the configuration of the DC-to-DC Converter and Charger Jumpers shown below.
Jumper
JP1901 JP1902 JP1903 JP1904 JP1906 JP1921 JP1922 JP1923 JP1924 JP1925
Name
DC/DC
Input
Current DC/DC
Run
Stop
DC/DC
Mode
Inductor
Current
Limit
DC/DC
Vout
Charger
Input
Current Charger
Output
Current Charger
Current Charge
Voltage
NTC
Setting
Position
In Place
Up
RUN
FIXED 660mA Open 5.0V In Place In Place
Up
100mA Open
4.2V Down
NoNTC
Jumper locations
Jumper settings
NOTE
In the next steps, perform these tasks which are identical to the tasks contained in Lab 1 of any
U381x course, to complete setup.
−
Task 1a – Establish Serial Communications between BeagleBone and PC
−
Task 1b – Establish Secure Shell (SSH) Communication between BeagleBone and PC
−
Task 1d – Configure BeagleBone to Connect to WLAN network
− Task 1e – Copy and Edit Files with WinSCP - only perform these two:
– Set Up WinSCP
–
Start PuTTY SSH Connection from WinSCP