Keysight U3810 Series Getting Started Guide
40
7
Type
Ctrl + C
to exit
connmanctl
.
Verify your connection with
ping
by entering
ping
www.keysight.com
in PuTTY. Press the
Ctrl + C
on the keyboard to stop the ping process.
debian@beaglebone:/$ ping www.keysight.com
PING e7793.x.akamaiedge.net (23.66.248.80) 56(84) bytes of data.
64 bytes from a23-66-248-80.deploy.static.akamaitechnologies.com
(23.66.248.80): icmp_seq=1 ttl=52 time=102 ms
64 bytes from a23-66-248-80.deploy.static.akamaitechnologies.com
(23.66.248.80): icmp_seq=2 ttl=52 time=125 ms
64 bytes from a23-66-248-80.deploy.static.akamaitechnologies.com
(23.66.248.80): icmp_seq=3 ttl=52 time=256 ms
64 bytes from a23-66-248-80.deploy.static.akamaitechnologies.com
(23.66.248.80): icmp_seq=4 ttl=52 time=182 ms
64 bytes from a23-66-248-80.deploy.static.akamaitechnologies.com
(23.66.248.80): icmp_seq=5 ttl=52 time=102 ms
64 bytes from a23-66-248-80.deploy.static.akamaitechnologies.com
(23.66.248.80): icmp_seq=6 ttl=52 time=127 ms
^C
--- e7793.x.akamaiedge.net ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5007ms
rtt min/avg/max/mdev = 102.375/149.384/256.170/54.741 ms
^Cdebian@beaglebone:/$
You might see error or failure in name resolution possibly due to your local network firewall. In
this case, it is recommended to use your own mobile hotspot as the internet access for
BeagleBone.
NOTE
In case you run into the following problem while setting up WLAN for example
connmanctl> scan wifi
Error /net/connman/technology/wifi: Did not receive a reply.
Possible causes include: the remote application did not send a reply, the message bus security
policy blocked the reply, the reply timeout expired, or the network connection was broken. Try
the steps below.
connmanctl> tether wifi disable
Disabled tethering for wifi
connmanctl> enable wifi
Error wifi: Already enabled
connmanctl> scan wifi
Scan completed for wifi
Summary of Contents for U3810A
Page 1: ...Keysight U3810A Advanced IoT Teaching Solution Getting Started Guide ...
Page 78: ...Keysight U3810 Series Getting Started Guide 78 IMU Characteristics from the LSM9DS1 datasheet ...
Page 131: ...Keysight U3810 Series Getting Started Guide 131 ...
Page 132: ...Keysight U3810 Series Getting Started Guide 132 Disassembly ...