Keysight Technologies U3810A, Getting Started Manual

Page: 48 / 134

Keysight U3810 Series Getting Started Guide 48
5
You can view the content in the USB memory stick on ls /mnt. You can copy files from /mnt using
the cp command to your home directory.
NOTE
Many systems will automatically mount into /media/usb. To manually mount to this area, first
the directory needs to be made and then mount the USB stick to this area.
debian@beaglebone:~$ sudo mkdir /media/usb
debian@beaglebone:~$ sudo mount /dev/sda1 /media/usb
6
Once the USB memory stick is no longer needed, issue the sudo umount /mnt command on this
device to flush all the buffers and close the device.
You have now completed the setup of your U3810A.
Students may begin on Lab 1. If the kit has been used by a student before setup and you performed
this setup to return the U3810A to factory configuration, it is suggested that you run at least the first
test in the next section.