Keysight Technologies U3022AE10, User'S And Service Manual

Page: 54 / 96

U3022AE10
Control Lines
Control Lines
The 15 pin female D-Sub connector on the front panel provides 8 latched data lines
that can be used to control your device under test (DUT). The lines can be controlled
with the Multiport External Test Set control, or Test Set I/O commands. Refer to
“External Test Set Control Feature” on page 3 8 and “Setting the Control Lines with
Address and Data Values” on page 58 . See Table 1 2 below for DUT control line
specification s .
The output voltage of the lines can be from the internal adjustable voltage source
(+2 to +5 Vdc), or an external DC power supply depending on how the connection to
the control line is configured. When using an external power supply a positive or
negative voltage can be used. Refer to
Figure 4 6 and Table 1 3 on page 5 5 for control
line pin location and description. Refer to “Internal Voltage Supply Configuration” on
page 5 6 and “External Voltage Supply Configuration” on page 5 7 for configurations.
Table 1 2 DUT Control Specifications
Item Specifications
Connector Type D-Sub, 15–pin female
Max Output Line Current 100 mA (each line)
Control Line DC resistance < 10 Ω (each line)
Voltage Range:
Positive Input 0 to +5 V
Negative Input –5 to 0 V
Internal Variable Voltage +2 to +5 V
54 Keysight U3022AE10 User's and Service Guide