Keysight Technologies B2900 Series, User Manual

Page: 140 / 234

4-40 Keysight B2900 User’s Guide, Edition 5
Front Panel Reference
Result key group
Result key group
Pressing the Result key displays the following softkeys for displaying the
measurement, limit test, and trace results.
Measure
Displays the measurement result. See “Measure Result dialog box” on page 4-40 .
Limit Test
Displays the limit test result. See “Limit Test Result dialog box” on page 4-41 .
Trace
Displays the trace result. See “Trace Statistical Result dialog box” on page 4-42 .
Measure Result dialog box
This dialog box is used to display the last single (one shot) measurement result
(maximum 100000 data) stored in the data buffer.
This dialog box provides the following GUI for displaying the measurement result.
The result data is shown in the index and data table below the Type field. Also, the
data is plotted in the graph area above the Points fields.
Ch Only on 2-channel models. Channel 1 (Ch 1) or 2 (Ch 2)
This field specifies the channel of the data to display.
Type Type of data to display, AMPS, VOLTS, OHMS, WATTS,
MATH, or TIME
AMPS: Current measurement data
VOLTS: Voltage measurement data
OHMS: Resistance data given by Resistance=Vmeas/Imeas
WATTS: Power data given by Power=Vmeas

Imeas
MATH: Calculation result data of math expression
TIME: Time data
In the above formula, Vmeas is the voltage measurement data,
and Imeas is the current measurement data.
For details on using resistance compensation, see “Resistance
Compensation” on page 6-16 .
Points Number of data points.