Keysight Technologies 16197A, Operation And Service Manual

Page: 38 / 73

38 Keysight16197A Operation and Service Manual
Operation
Performing Fixture Compensation
3-
Figure 3-17 Standby Position of the Pressure Road
Measuring OPEN Compensation Data
With the fixture in an OPEN state, measure the OPEN compensation data.
Step 7. Press the lever to raise the pressure rod, and remove the shorting bar used to
measure the SHORT compensation data ( Figure 3-18,1 ).
Step 8. Press the lever to raise the pressure rod ( Figure 3-18 ,2), and push the latch to
secure the pressure rod in its raised position ( Figure 3-18,3 ).
Figure 3-18 Setting the Fixture for OPEN State
Confirm that the end of the pressure rod is not deformed. Replace the rod
if deformed. For the replacement part, see “Replaceable Parts” on
page 61 .