MRG
MRG
MRG
MRG----1
1
1
1
０
０
０
０
Configuration method
Configuration method
Configuration method
Configuration method
4-1
4 Configuration method
It is a simple task to configure the MRG-10.
The MRG-10 can be configured with:
Display Panel & Key SW on MRG-10
PC (Setup Software)
4.1 Display Panel & Key SW
4.1.1
Display
Bar graph, measured data and units are
displayed during normal operation. Blinking
display of the last measured value indicates
that gauge is in search mode.
When the key SW is used in configuration
mode, the menu number or registered data
is displayed.
4.1.2
Key SW
1: ENT (Enter) key
Changes display from measurement mode to configuration mode.
Moves to the lower layer (from main menu to sub menu).
Moves the blinking cursor to the target column when changing the registered data.
Inputs data.
2: ESC (Escape) key
Changes display from configuration mode to measurement mode.
Moves to the upper layer (from sub menu to main menu).
Freezes changes to registered data.
3:
△
(Up) key
Increases the main menu number and the sub menu number.
Increases the blinking column value.
4:
▽
(Down) key.
Decreases the main menu number and the sub menu number.
Decreases the flashing column value.
m
Bar graph [%]
Measured value
Unit
mA
%
ft
m
ESC ENT
