( ii )
Introduction
This User’s Guide includes detailed explanations of MRG-10 safety cautions,
installation, configuration, and troubleshooting. Users should carefully read this manual
before operation to ensure an adequate understanding of the equipment.
Proper use of the User’s Guide
The following points must be observed:
(1) Carefully read the User’s Guide
The contents of the User’s Guide are very important. Carefully read the entire
manual.
(2) Store the User’s Guide in safe location.
The User’s Guide is very important for the operation of the equipment. Store the
manual in a safe and accessible location. The storage location and person
responsible for maintaining the Guide should be considered carefully.
(3) Ensure that the User’s Guide is supplied to the operator of the equipment.
The representative or dealer of this equipment must supply this User’s Guide to
the user who will actually operate the equipment.
(4) The User’s Guide should be replaced if it is lost.
If the User’s Guide is lost, contact the representative listed on the back cover. A
new manual may be purchased.
Restrictions and cautions necessary to maintain the equipment
The following items must be observed to ensure that the equipment is maintained
properly. Refer to the pages corresponding to each topic for details. The
corresponding pages are shown in ( ) brackets.
(1) Do not drop unit or subject unit to impact.
(2) Use the unit in appropriate temperature environments.
(Refer: p.6-2 Operating condition)
(3) Use the unit under appropriate process temperature and pressure.
(Refer: p.6-2 Operating condition)
(4) Always use an appropriate power supply.
(Refer: p.6-1 Power Supply voltage)
(5) Do not loosen union nut when tank is pressured.
(Refer: p.2-5 Mounting the cone antenna)
