Keiki MRG-10, User Manual

Page: 30 / 55

MRG MRG MRG MRG----1 1 1 1
０ ０ ０ ０
Configuration method Configuration method Configuration method Configuration method
4-8
[4--] Calibration
[4-1] 4mA Calibration
Parameter Default Value Description
3.50-4.50 4.00 In fixed current output mode with current set at 4mA, input
ammeter reading.
[4-2] 20mA Calibration
Parameter Default Value Description
15.00-25.00 20.00
In fixed current output mode with current set at 20mA, input
ammeter reading.
[4-3] Offset Calibration
Parameter Default Value Description
-1.00-1.00 0.00 Parameter range in metric [m] units
If measurement unit is [ft], display will be converted to show ‘feet’ units.
[4-4] Span Calibration
Parameter Default Value
0.90-1.10 1.00
[5--] Advanced Setting
[5-1] Averaging Time
Parameter Default Value Description
1-120 10 Measuring value is averaged in accordance with
[sec] setting
[5-2] Noise Margin
Parameter Default Value Description
0-10000 300 Noise is eliminated in accordance with [1/100dB]
setting
When noise level is high, noise can be masked by attenuating the signal gain.
[5-3] Search Delay
Parameter Default Value Description
1-120 30 Time delay after loss of echo until restart in accordance with
[sec] setting.
[5-4] Alarm Delay
Parameter Default Value Description
1-120 30 Time delay after loss of echo until alarm sounds in
accordance with [sec] setting.
10
24
S
ig
n
a
l A
m
p
lit
u
d
e
[d
B
]
14
Set noise margin
as 10.00dB
Noise
S
ig
n
a
l A
m
p
lit
u
d
e
[d
B
]