Kaysun KMF-100 DVN4, Engineering Data Book

Page: 102 / 140

V6R VRF 50Hz
Part 3 - S
yst
em Design and Ins
talla
tion
Mini Amazon III Series
101

2.2 Indoor Units
2.2.1 Placement considerations
Placement of indoor units should take account of the following considerations:

S ufficient space for drain piping and for access during servicing and maintenance should be allowed.

To ensure a good cooling/heating effect, short-circuit ventilation (where outlet air returns quickly to a unit’s air inlet)
should be avoided.

To prevent excessive noise or vibration during operation, suspension rods or other weight-bearing fixings should
typically be able to bear twice the unit’s weight.
Notes for installers

Before installing an indoor unit, check that the model to be installed is as specified in the construction drawings
and confirm the correct orientation of the unit.

Ensure that units are installed at the correct height.

To allow smooth condensate drainage and to ensure unit stability (to prevent excessive noise or vibration),
ensure that units are level to within 1° of the horizontal. If a unit is not level to within 1° of the horizontal, water
leakage or abnormal vibration/noise may occur.