Kaye Validator AVS, User Manual

Page: 11 / 167

Chapter 1. The Kaye Validator
1.3 About this Manual
This manual is intended to provide overview information on the Validator, instructions on
getting started with the software, and step-by-step instructions on using the Validator in
standalone mode.
The first part of this manual provides an overview of the Validator hardware, instructions for
creating user accounts and entering asset and equipment information, and an overview on
using the Validator software. The second part of this manual covers using the Validator in
standalone mode, including calibrating sensors, running qualification studies, and verifying
sensor calibration.
The following is a brief description of each section of this user's guide:

Chapter 1 provides an overview of the Validator system.

Chapter 2 explains the Validator hardware and provides instructions for connecting the
system.

Chapter 3 provides instructions for creating user accounts.

Chapter 4 provides instructions for entering Kaye equipment into the system.

Chapter 5 provides instructions for entering customer assets into the system.

Chapter 6 provides instructions for creating setups.

Chapter 7 provides instructions for performing calibration or verification in standalone
mode.

Chapter 8 provides instructions for displaying live data on the Console.

Chapter 9 provides instructions for performing a qualification study in standalone mode.

Chapter 10 provides instructions for creating reports.
4
Kaye Validator User’s Manual