KaVo FOCUS 215720, Installation Manual

Page: 37 / 63

4 Installation steps
FOCUS 31
RJ-45 connector pin number order
1.
Cut the cable from the connection box board
end.
2.
Route the cable from the remote control panel
to the unit X-ray unit.
3.
Remove cable tubing carefully about 2"
(50mm).
4.
Strip the wires about 1/3" (8mm).
5.
Attach stripped wires to terminal strip X61 as
shown in the table below. In case of shielding
foil leave it unconnected.
6.
Verify connections. Remote control panel cable
is a straight through cable (pin 1 connected to
pin 1 etc.).