KaVo FOCUS 215720, Installation Manual

Page: 34 / 63

4 Installation steps
28 FOCUS
4.
Attach the included cable tie anchor to the right
side of the control panel frame.
5.
Remove the strain relief from the external
exposure button by opening the nut from the
strain relief.
6. Attach the control panel frame to the optional
electronics mounting plate of the treatment unit
adapter kit.
7.
Install the included short Ethernet cable TWO
times through the ferrite (make a loop around
the ferrite and close it tightly). Leave approx.
8-10 centimeters of free cable to connect the
control panel circuit board.