KaVo FOCUS 215720, Installation Manual

Page: 46 / 63

4 Installation steps
40 FOCUS
See section 3 Pre-installation for the mains voltage
and fuse requirements.
Use only approved cables and plugs.
Mains connector type:

NEMA 5-15P (115 V), NEMA 6-15P (230 V) or
similar Hospital Grade
Power supply cord type:

EU 230V: H05VV-F / 1.5 mm
2
(UL 2587), max.
3 m / 9.8 ft.

115V: 115 V / 15A, Type: SJT, min. 14AWG,
max. 3 m / 9.8 ft. Complies with UL817 and
CSA C22.2 NO 21.
WARNING! Only a qualified technician is permitted
to carry out these connections.
WARNING! Before connecting to the mains, make
sure that the cable connections to the fuses are
wired as instructed.
4.10.2 Converting a non-permanent (plug)
wiring to permanent
NOTICE! For permanent installation, a separate
lockable mains switch (not supplied) is required to
be installed.
1.
Remove the cable clamp and the power supply
cable.