KaVo FOCUS 215720, Installation Manual

Page: 18 / 63

4 Installation steps
12 FOCUS
If the wall is constructed with metal studs, a
support plate is needed when mounting the unit.
Attach a sturdy wooden or steel plate to the
opposite side of the steel stud wall and bolt through
with the single stud mounting plate.
Before mounting the plate make sure that the
bolts, which are used for attaching of the unit, are
put first to the holes so that they come out visible
when the plate is mounted on the wall.
4.2.2 Wide wall mount plate
If the unit is mounted to a wall with 16 inch center
studs specify the site of the unit and fasten the
mounting plate firmly to the wall. Level the
mounting plate.
NOTICE! Any property damage or personal injury
resulting from improper installation could become
the responsibility of the person who has done the
installation.
Wall type Anchor Thread Screw Washer
1 K25
Concrete
wall
HSA expansion
anchor
M8
2 K30
Concrete
wall
HKD-S flush
anchor
M8 DIN
912
M8x20
DIN
125-B
8,7
3 Wood
frame
wall
DIN
571
8x90
DIN
125-B
8,7
4 Steel
frame
Installing the
unit directly to
steel framing is
not
recommended.
Recommended
is a 2”x6”
backing (2”x4”
minimum).
Then install as
per #3 above.