KaVo FOCUS 215720, Installation Manual

Page: 15 / 63

3 Pre-installation
FOCUS 9
NOTICE! The reaches listed are with the 9-inch
(229 mm) cone. Using the optional 12-inch (305
mm) cone will reduce the arm reach by 3 inches
(76 mm).
3.2 Tools and hardware
NOTICE! All screws, bolts, nuts and washers used
in the unit are in metric sizes.
The following tools are required during the
installation:

Metric Allen wrench set

Electric drill, drill bits (8 mm & 10 mm or equal)

Mounting hardware for wall bracket

Pencil or drawing ink

Spirit Level

Hammer

Anchor driver (concrete wall)

Pozidrive or phillips screwdrivers (PZD-1 and
PZD-2)

Pliers

Knife or scissors

Wrenches, 13 mm and 19 mm

Tape measure
Make sure that you have all tools and items needed
prior to installation.
NOTICE! This unit is intended for fixed installation
only, therefore mobile installation is prohibited.