KaVo 3D eXam, Operator'S Manual

Page: 134 / 170

Kavo 3D eXam ® Operators’ Manual
k990400 September 19, 2007
12-8
Preventive Maintenance Schedule - for Owner / User
Daily: Routine Dusting - all surfaces
Monthly: Clean all surfaces and check for failed/faulty indicator
lights
Yearly: Check for satisfactory film density
IT IS THE RESPONSIBILITY OF THE USER TO INSURE THAT
THE EQUIPMENT IS MAINTAINED IN COMPLIANCE WITH
THE MANUFACTURER'S RECOMMENDED MAINTENANCE
SCHEDULE. THE MANUFACTURER AND THE ASSEMBLER
/ INSTALLER ARE RELIEVED FROM RESPONSIBILITY IN
THOSE CASES WHERE NON-COMPLIANCE WITH THE
STANDARD RESULTS FROM THE USER'S FAILURE TO
HAVE THE MANUFACTURER'S RECOMMENDED
MAINTENANCE PERFORMED.
The actual maintenance inspection and consequent service must be
accomplished either by an authorized Imaging Sciences
International dealer or by any other competent serviceman of the
user's choice who has had adequate training in those aspects of the
Performance Standards of the Radiation Control for Health and
Safety Act of 1968 that are applicable to this equipment.
Neither the inspection nor service is part of the equipment warranty.
(To be arranged for by the Owner or User with the Dealer's Service
Department)