KaVo 3D eXam, Operator'S Manual

Page: 160 / 170

Kavo 3D eXam ® Operators’ Manual
k990400 September 19, 2007
B-6
Configure iCATTransfer
1. Launch iCATTransfer, the following window is displayed.
2. Under Folder to Watch , Browse to iCATVision\ iCATVision
Watch folder and select. (This is most likely on the C: drive of
the iCAT
®
Acquisition Computer).
3. Under Image Root Folder (Primary Destination), Browse to
iCATVision Root folder and select. (This is most likely on a
server/central storage location).
4. Click Start . This saves the preset Watch and Root destinations.
NOTE:
If START is not clicked the transfer program will not work.
Remember, iCATTransfer must be running in order for the data to
transfer (iCATTranfer can be minimized).
Accessing i-CAT
®
DICOM Data
iCATTransfer requires data to be exported from the iCAT
®
software
in DICOM3 format.