KaVo 3D eXam, Operator'S Manual

Page: 70 / 170

Kavo 3D eXam ® Operators’ Manual
k990400 September 19, 2007
8-4
The cross section views are located as indicated by the hash marks
displayed in the axial slice position view. If the 0.00 position is
displayed, it is outlined in red. All slices to the patient’s right side
are displayed as negative numbers. All slices to the patient’s left side
are displayed as positive numbers.
2. Use the panoramic map view to modify the position of the cross
section views (which are represented on the axial slice position
view) and modify the criteria used to generate the cross section
views (at the lower right of the Implant Panning Screen):
a. Drag the O in the center of the horizontal toolbar (bottom of
view) left or right to change the location of the center axial
cross section. Changes made here are reflected on the axial
slice position view and the cross section views.
b. Drag the solid dot on the right side of the diagonal toolbar
(bottom right) to adjust the slice thickness displayed on the
panoramic map view.