KaVo 3D eXam Operator'S Manual Download Page 61

Page: 61 / 170

k990400 September 19, 2007

Reconstruction of Anatomy

7-15

2. Using the rotation tool, click and drag to rotate the selected

image. A grid appears over the selected image to provide a
reference for rotation.

3. After the selected image is rotated, release the mouse. The grid

is no longer present.

To complete the rotation of the entire data set:

4. Right click the image and select

Rotate Volume now

The menu closes and the software
recalculates the selected rotation in
all views.

To return to the original rotation
orientation:

5. Right click the image and select

Reset Volume Rotation

The menu closes and the software recalculates the original rotation
in all views.

Summary of Contents for 3D eXam











































































































































































Search results

Summary of Contents for 3D eXam

Reviews:

Related manuals for 3D eXam

Brands by name

Popular brands

KaVo 3D eXam, Operator'S Manual

Search results

Summary of Contents for 3D eXam

Reviews:

Related manuals for 3D eXam

Brands by name

Popular brands