background image

Kavo 3D eXam ®  Operators’ Manual

k990400    September 19, 2007

B-2

3. On the server or central storage location, create another folder 

named iCATVision.

4. Under this iCAT Vision folder create a sub folder named 

iCATVision Root

File structure on server/central storage location:

C:\

If a server/central storage location is not available, then create 
the iCATVision Root directory on the iCAT

®

 Acquisition 

Computer’s C: drive under the iCAT Vision Folder.

Create a new Folder

1. Open the folder where the new folder is to reside.

2. Right click and select 

New > Folder

.

3. Type the name for the new folder.

Install iCATVision

1. Unzip the iCATVision.zip file to the iCAT Vision folder, it 

unzips to iCATVision.exe.

2. Double click the .exe file to execute the program.

A shortcut can be created for this program on your desktop.

To unzip a file:

Right-click file and click 

Extract 

on the shortcut menu. 

To create a shortcut:

Right click file and select 

Send to > Desktop (create shortcut)

.

Summary of Contents for 3D eXam











































































































































































Reviews: