KaVo 3D eXam, Operator'S Manual

Page: 10 / 170

Kavo 3D eXam ® Operators’ Manual
k990400 September 19, 2007
1-2
The system consists of a Gantry and Computer Workstation. In order
for the system to operate, both the Gantry and Computer
Workstation must be turned ON.
The system captures data for 3D Skull Reconstruction for the
following procedures:
•
Implants
•
TM Joints
•
Reconstructed Panoramic
•
Reconstructed Cephalometrics
•
Airway / Sinus, etc.
•
iPAN - Optional Conventional Digital Panoramic Feature
CT is a medical imaging technique that uses X-rays to obtain cross-
sectional images of the head or neck. The quality of the images
depends on the level and amount of X-ray energy delivered to the
tissue. CT imaging displays both high-density tissue, such as bone,
and soft tissue. When interpreted by a trained Physician, CT images
provide useful diagnostic information.
Major System Items
The system is comprised of the following major items:
•
KaVo 3D eXam Scanner
•
Computer Workstation
•
Operator Control Box with 30 ft. (9.1m) Cable
•
Patient Emergency Stop Box with 10 ft. (3m) Cable
•
Interlock Jumper Cable, 8 inch (20cm)
•
Chair Connection Cable, 10 ft. (3m)
•
Power Cable, 15 ft.(4.6m)
•
CAT 5 Ethernet Cable, 10 ft. (3m)
About the Operators’ Manual
This documentation describes the safe and effective operation of the
system. The information is intended to provide trained
Technologists and Physicians the necessary guidance to operate the
system in a safe and effective manner.