75
Follow all on-screen instructions!
Once the update is complete, the receiver is re-initialised and starts operation
again. Never turn off the receiver during the update process, as otherwise you
could lose the entire software. You would then need to re-install it in a workshop
or using a PC and network cable. You can use the “System Information” on
the Service Menu to check whether the new software has been installed.
Check the time setting following a software update!
Main Menu - Service Menu
If new software is available, the following
is displayed (example):
Press
button to start the update
process or the
button to leave the
menu without updating the software.
After starting the update, you will see the
following on-screen display:
Once the software has been completely
downloaded, you will see the following
on-screen display:
To save the new software, press the
button. If you want to cancel the
process, using the
buttons
fi
rst
select “No” and then press the
button.
After starting the update, you will see the
following on-screen display:
Summary of Contents for UFS 931sw/HD+
