manualshive.com logo in svg

Kathrein UFS 931sw/HD+, Operating Manual

Share
Download
Kathrein UFS 931sw/HD+ Operating Manual Download Page 57

57

After calling up the menu you will see 
the following on-screen display:

You have three different search options:

-  Standard Channel Search

-  Automatic Channel Search

-  Advanced Channel Search

Use the 



 buttons to select the 

desired search type and con

fi

 rm  your 

selection using the 

 button.

Main Menu - Search for Channels

Standard 
Channel 
Search

The channel list currently set is 
updated

Automatic 
Search

All transponders for the satellite 
you selected will be searched

Advanced 
Channel 
Search

Only the selected transponder for 
the satellite you selected will be 
searched

After a search (of whatever type) the receiver shows all newly found 
channels in the channel list under the heading “New Channels”.
You will 

fi

 nd this rubric in the channel list at the end of the green complete 

list (select using the 



 buttons).

The channel list is called up on to the TV screen by pressing the 

 

button (see also section “Basic Functions”, “Channel selection from the 
channel list”).

T

ip!

T

ip!

After calling up the menu you will see 
the following on-screen display:

Press the 

 button to start updating the list selected above.

Summary of Contents for UFS 931sw/HD+

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands