20
Transmission channel
Select a free available transmission channel.
Transmission Frequency
If not preset by the receiver, select here one of the free
available transmission frequencies.
See example on the right (EXR 551) assignment of a
transmission channel to a transmission frequency.
Secure Channel with PIN (not possible in every system)
If your single cable system allows the transmission frequency to be protected by entering a PIN, this is
the menu where that can be done. No other receiver can then use this transmission frequency unless
the PIN is entered.
Select the setting “Yes”. You then have the use of the number pad to enter a PIN code (0-255) in the line
beneath “Password PIN”.
Connection and Set-Up
Refer to the documentation supplied with your system for the settings for the
SCR, frequencies and any PIN assigned to the tuner. You will fi nd there a printed
list showing the assignment between the various SCRs and the respective
transmission frequencies. It may happen that you cannot freely select the
PIN for protection of individual frequencies; this also may be listed in the
documentation for the single-cable components.
Please note also that multiple receivers cannot share the same frequencies/
channels - the receivers would interfere with each other.
SCR = Satellite Channel Router (transmission channel)
Test Connection
Switch to the “Test Connection” line and press the
button. The receiver now tests the settings you
have made.
The following message appears:
Summary of Contents for UFS 931sw/HD+
